Правила форума

Этот раздел, как вы могли заметить по названию, предназначен для решения вопросов по поводу уже существующих модов и плагинов.
Пожалуйста, если у вас проблема с написанием плагина, не путайте этот раздел с разделом по скриптингу.
Для поиска плагинов и модов существует соответствующий раздел.

Название темы должно соответствовать содержанию. Темы с названием типа "Помогите", "Вопрос", "парни подскажите..." - будут удалены.
Все темы, не относящиеся к "Вопросам по модам и плагинам", будут удалены или перемещены в соответствующий раздел.

Правила оформления темы:
1. Помимо заголовка не забудьте верно сформулировать свой вопрос.
2. Выложите исходник (в тег кода

+

) или ссылку на плагин который вызывает у вас вопросы.
3. Выложите лог с ошибками (если имеется) под спойлер

Настройка бана по Steam_ID в Dproto.cfg

, Банит игроков non_steam по IP, а не Steam_id или Valve_id

Опции

Steam	31.1.2015, 1:30 Сообщение #1
Стаж: 12 лет Сообщений: 36 Благодарностей: 1 Полезность: 19	Добрый день! Проблема следующая. Когда баню игрока на сервере, если игрок real Steam, то банится по Steam_id, а если игрок non steam или non_valve, то банится по ip. Раньше банило всех без исключения по Steam_id или VALVE_ID Хотелось бы, что бы и не только клиентов real_Steam, но и с пиратских версий банило по Steam или Valve id Сам файл dproto.cfg ниже: Скрытый текст # # General rule for modifying this file: # DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS # # ======================================================== # DPROTO CONFIGURATION # ======================================================== # LoggingMode: # 1 = Console # 2 = Log Files # 3 = Both LoggingMode = 2 # ======================================================== # AUTHID MANAGEMENT # ======================================================== # ClientID types (for cid_* options) # 1: Real (or generated by HW) steam (STEAM_xx:xx:xx) # 2: Real (or generated by HW) valve (VALVE_xx:xx:xx) # 3: STEAM_ by IP # 4: VALVE_ by IP # 5: Deprecated - client will be rejected # 6: reserved for future use # 7: HLTV # 8: STEAM_ID_LAN # 9: STEAM_ID_PENDING # 10: VALVE_ID_LAN # 11: VALVE_ID_PENDING # 12: STEAM_666:88:666 # Use these options to set authid's for clients # for HLTV (default is HLTV [7] ) cid_HLTV = 7 # for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8] ) cid_NoSteam47 = 8 # for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10] ) cid_NoSteam48 = 10 # For Legit Steam clients (default is real STEAM_xx:xx:xx [1]) cid_Steam = 1 # Client recognized as pending when they sucessfully authorized, but did not get steam id # REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example) # default is STEAM_ID_PENDING [9] cid_SteamPending = 9 # For players having revEmu ( >= 9.74) on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu = 2 # For players having RevEmu 2013 on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu2013 = 2 # For players having SteamClient 2009 / revEmu > 9.82 on client-side: # default is real STEAM_xx:xx:xx [1] cid_SC2009 = 2 # For players having old revEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_OldRevEmu = 2 # For players having hCupa's SteamEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_SteamEmu = 1 # For players having AVSMP (Cracked Steam) on client-side: # default is real STEAM_xx:xx:xx [1] cid_AVSMP = 2 # For SETTI ServerScanner # default is STEAM_xx:xx:xx generated by IP [3] cid_Setti = 4 # For SXEI Clients # default is real STEAM_xx:xx:xx [1] cid_SXEI = 1 # EnableSXEIdGeneration (0 / 1) # Turns on steamid generation based on info sent by sXeI client # Enable this only if you have sXeI server installed! EnableSXEIdGeneration = 0 # SC2009_RevCompatMode (0 / 1) # Enable fix to make steamids generated for SC2009 compatible with revEmu SC2009_RevCompatMode = 1 # SteamEmuCompatMode (0 / 1) # An analog for eSTEAMATiON's EnforceSteamEmuCompatIDMode option. # Affects only Old RevEmu and SteamEmu emulators. SteamEmuCompatMode = 1 # OldEstCompatMode (0 / 1) # Enables/Disables fix for steamids generated by eST in 0.3.1 version. # Set this to 1 if you want to make steamids generated by eST as in < 0.3.0 versions. OldEstCompatMode = 0 # IPGen_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by IP IPGen_Prefix1 = 0 # IPGen_Prefix2 (int) # STEAM_a:b:c # second prefix (b) for authids generated by IP IPGen_Prefix2 = 4 # Native_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by native auth method (Steam) Native_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by Steamclient 2009 SC2009_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu RevEmu_Prefix1 = 0; # RevEmu2013_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu2013 RevEmu2013_Prefix1 = 0; # OldRevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by old RevEmu OldRevEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by SteamEmu SteamEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for AVSMP Clients (Cracked steam) AVSMP_Prefix1 = 0; # Setti_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for Setti server scanner Setti_Prefix1 = 0; # SXEI_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for sXeI clients SXEI_Prefix1 = 0; # Note that banid will use steamid WITHOUT any prefixes! # ======================================================== # ATTACKS SUPRESSION # ======================================================== # FakePlayers_ConnectInitiationCheck (seconds) # Sets the time, in seconds, in which client should initiate # game session (in other words, send the "new" command) after it has # been connected. If client did not initiated game session, it will be marked as # fake and kicked. # Default is 6 seconds. # Use 0 to disable this check. FakePlayers_ConnectInitiationCheck = 6 # FakePlayers_ClientValidationCheck (seconds) # Sets the time, in seconds, in which client should answer to random unique command # sent by server. If client did not answered for this command, it will be marked as # fake and kicked. # Default is 8 seconds. # Use 0 to disable this check. FakePlayers_ClientValidationCheck = 8 # FakePlayers_AntiReconnect (0/1) # Enables detection of fakeplayers that reconnects quickly (every < 10 seconds) # before fake players checks have completed. # This check will work only if FakePlayers_ClientValidationCheck and # FakePlayers_ConnectInitiationCheck are enabled. # Default is 1 (ON). FakePlayers_AntiReconnect = 1 # FakePlayers_CommandsOrderCheck (0/1) # Enable commands order checking on the start of initiated connection # Default is 1 (ON). FakePlayers_CommandsOrderCheck = 1 # FakePlayers_BanTime (minutes) # Dproto will ban IP spamming fakeplayers for time (in minutes) specified in this variable # use 0 for permanent ban # use negative vaules to disable ban (fake players will only be kicked) FakePlayers_BanTime = 120 # Exploits_CheckDownloads (0/1) # Enable checking of requested download files against precached resources # Default is 1 (ON). Exploits_CheckDownloads = 1 # Exploits_DisableUploads (0/1) # Disable file uploads (not customizations) to the server # Default is 1 (ON). Exploits_DisableUploads = 1 # ======================================================== # OTHER STUFF # ======================================================== # DisableNativeAuth (0/1) # Disables valve/steam auth system. # For p.47 Based: Server will not connect to auth servers. # For All: Server will not call authorization functions. # This is a fix for startup freeze for old (p.47) servers. DisableNativeAuth = 0 # ServerInfoAnswerType (0/1/2) # Sets server answer type for query requests # 0 = New style (Source Engine) # 1 = Old Style (Fix favorites list for p.47 clients) # 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request ServerInfoAnswerType = 0 # Game_Name (string) # Sets game name displayed for clients # If Game_Name is empty, native game name will be used Game_Name = [ARMY MOD] # Enables fix for proper player id displaing on HLStats server monitoring # Enable this only if you have HLStats HLStatsPlayerIdFix = 0 # ExportVersion (0 / 1) # Enables/Disables exporting of dp_version cvar # 1 = dp_version cvar will be exported to server rules. It will be visible in server monitoring tools (like HLSW) # 0 = dp_version cvar will not be exported to server rules. ExportVersion = 1 # HLTVExcept_IP (ip addr) # HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated) HLTVExcept_IP = 127.0.0.1
	Поблагодарили 0 раз Поблагодарили 0 раз

ex3m777	31.1.2015, 1:37 Сообщение #2
Стаж: 13 лет Город: Москва Сообщений: 2037 Благодарностей: 1135 Полезность: 968 Меценат	чё курим? бан система какая? Напишу программу на python
	Поблагодарили 0 раз Поблагодарили 0 раз

Steam	31.1.2015, 1:40 Сообщение #3
Стаж: 12 лет Сообщений: 36 Благодарностей: 1 Полезность: 19	advanced_bans Цитата(ex3m777 @ 31.1.2015, 5:37) чё курим? бан система какая?
	Поблагодарили 0 раз Поблагодарили 0 раз

ex3m777	31.1.2015, 1:41 Сообщение #4
Стаж: 13 лет Город: Москва Сообщений: 2037 Благодарностей: 1135 Полезность: 968 Меценат	зачем использовать эту хрень.. Я с вас в шоке Напишу программу на python
	Поблагодарили 0 раз Поблагодарили 0 раз

voed	31.1.2015, 1:43 Сообщение #5
Стаж: 11 лет Сообщений: 2593 Благодарностей: 1760 Полезность: 405	Цитата(ex3m777 @ 31.1.2015, 1:41) зачем использовать эту хрень.. Я с вас в шоке Почему хрень? Если плагин без ненужной в 90% случаев БД, значит он хрень? Конфиг плагина посмотреть бы, да и исходник не помешает
	Поблагодарили 1 раз Поблагодарили 1 раз ~~Akinach~~

Steam	31.1.2015, 1:45 Сообщение #6
Стаж: 12 лет Сообщений: 36 Благодарностей: 1 Полезность: 19	Мне нравится. Если я ставлю такой конфиг в Dproto, то банит как положено всех, по Steam или Valve ID Скрытый текст # # General rule for modifying this file: # DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS # # ======================================================== # DPROTO CONFIGURATION # ======================================================== # LoggingMode: # 1 = Console # 2 = Log Files # 3 = Both LoggingMode = 2 # ======================================================== # AUTHID MANAGEMENT # ======================================================== # ClientID types (for cid_* options) # 1: Real (or generated by HW) steam (STEAM_xx:xx:xx) # 2: Real (or generated by HW) valve (VALVE_xx:xx:xx) # 3: STEAM_ by IP # 4: VALVE_ by IP # 5: Deprecated - client will be rejected # 6: reserved for future use # 7: HLTV # 8: STEAM_ID_LAN # 9: STEAM_ID_PENDING # 10: VALVE_ID_LAN # 11: VALVE_ID_PENDING # 12: STEAM_666:88:666 # Use these options to set authid's for clients # for HLTV (default is HLTV [7] ) cid_HLTV = 7 # for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8] ) cid_NoSteam47 = 8 # for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10] ) cid_NoSteam48 = 10 # For Legit Steam clients (default is real STEAM_xx:xx:xx [1]) cid_Steam = 1 # Client recognized as pending when they sucessfully authorized, but did not get steam id # REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example) # default is STEAM_ID_PENDING [9] cid_SteamPending = 9 # For players having revEmu ( >= 9.74) on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu = 1 # For players having RevEmu 2013 on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu2013 = 1 # For players having SteamClient 2009 / revEmu > 9.82 on client-side: # default is real STEAM_xx:xx:xx [1] cid_SC2009 = 1 # For players having old revEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_OldRevEmu = 1 # For players having hCupa's SteamEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_SteamEmu = 1 # For players having AVSMP (Cracked Steam) on client-side: # default is real STEAM_xx:xx:xx [1] cid_AVSMP = 1 # For SETTI ServerScanner # default is STEAM_xx:xx:xx generated by IP [3] cid_Setti = 3 # For SXEI Clients # default is real STEAM_xx:xx:xx [1] cid_SXEI = 1 # EnableSXEIdGeneration (0 / 1) # Turns on steamid generation based on info sent by sXeI client # Enable this only if you have sXeI server installed! EnableSXEIdGeneration = 0 # SC2009_RevCompatMode (0 / 1) # Enable fix to make steamids generated for SC2009 compatible with revEmu SC2009_RevCompatMode = 1 # SteamEmuCompatMode (0 / 1) # An analog for eSTEAMATiON's EnforceSteamEmuCompatIDMode option. # Affects only Old RevEmu and SteamEmu emulators. SteamEmuCompatMode = 1 # OldEstCompatMode (0 / 1) # Enables/Disables fix for steamids generated by eST in 0.3.1 version. # Set this to 1 if you want to make steamids generated by eST as in < 0.3.0 versions. OldEstCompatMode = 0 # IPGen_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by IP IPGen_Prefix1 = 0 # IPGen_Prefix2 (int) # STEAM_a:b:c # second prefix (b) for authids generated by IP IPGen_Prefix2 = 4 # Native_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by native auth method (Steam) Native_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by Steamclient 2009 SC2009_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu RevEmu_Prefix1 = 0; # RevEmu2013_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu2013 RevEmu2013_Prefix1 = 0; # OldRevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by old RevEmu OldRevEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by SteamEmu SteamEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for AVSMP Clients (Cracked steam) AVSMP_Prefix1 = 0; # Setti_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for Setti server scanner Setti_Prefix1 = 0; # SXEI_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for sXeI clients SXEI_Prefix1 = 0; # Note that banid will use steamid WITHOUT any prefixes! # ======================================================== # ATTACKS SUPRESSION # ======================================================== # FakePlayers_ConnectInitiationCheck (seconds) # Sets the time, in seconds, in which client should initiate # game session (in other words, send the "new" command) after it has # been connected. If client did not initiated game session, it will be marked as # fake and kicked. # Default is 6 seconds. # Use 0 to disable this check. FakePlayers_ConnectInitiationCheck = 6 # FakePlayers_ClientValidationCheck (seconds) # Sets the time, in seconds, in which client should answer to random unique command # sent by server. If client did not answered for this command, it will be marked as # fake and kicked. # Default is 8 seconds. # Use 0 to disable this check. FakePlayers_ClientValidationCheck = 8 # FakePlayers_AntiReconnect (0/1) # Enables detection of fakeplayers that reconnects quickly (every < 10 seconds) # before fake players checks have completed. # This check will work only if FakePlayers_ClientValidationCheck and # FakePlayers_ConnectInitiationCheck are enabled. # Default is 1 (ON). FakePlayers_AntiReconnect = 1 # FakePlayers_CommandsOrderCheck (0/1) # Enable commands order checking on the start of initiated connection # Default is 1 (ON). FakePlayers_CommandsOrderCheck = 1 # FakePlayers_BanTime (minutes) # Dproto will ban IP spamming fakeplayers for time (in minutes) specified in this variable # use 0 for permanent ban # use negative vaules to disable ban (fake players will only be kicked) FakePlayers_BanTime = 120 # Exploits_CheckDownloads (0/1) # Enable checking of requested download files against precached resources # Default is 1 (ON). Exploits_CheckDownloads = 1 # Exploits_DisableUploads (0/1) # Disable file uploads (not customizations) to the server # Default is 1 (ON). Exploits_DisableUploads = 1 # ======================================================== # OTHER STUFF # ======================================================== # DisableNativeAuth (0/1) # Disables valve/steam auth system. # For p.47 Based: Server will not connect to auth servers. # For All: Server will not call authorization functions. # This is a fix for startup freeze for old (p.47) servers. DisableNativeAuth = 0 # ServerInfoAnswerType (0/1/2) # Sets server answer type for query requests # 0 = New style (Source Engine) # 1 = Old Style (Fix favorites list for p.47 clients) # 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request ServerInfoAnswerType = 0 # Game_Name (string) # Sets game name displayed for clients # If Game_Name is empty, native game name will be used Game_Name = [ARMY MOD] # Enables fix for proper player id displaing on HLStats server monitoring # Enable this only if you have HLStats HLStatsPlayerIdFix = 0 # ExportVersion (0 / 1) # Enables/Disables exporting of dp_version cvar # 1 = dp_version cvar will be exported to server rules. It will be visible in server monitoring tools (like HLSW) # 0 = dp_version cvar will not be exported to server rules. ExportVersion = 1 # HLTVExcept_IP (ip addr) # HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated) HLTVExcept_IP = 127.0.0.1 Но, тогда при использовании army_ranks звания закреплены за теми, у кого REAL STEAM Цитата(ex3m777 @ 31.1.2015, 5:41) зачем использовать эту хрень.. Я с вас в шоке То есть, как я выяснил-проблема не в самой системе банов advanced_bans а в Dproto, а именно, в его настройке
	Поблагодарили 0 раз Поблагодарили 0 раз

ex3m777	31.1.2015, 5:42 Сообщение #7
Стаж: 13 лет Город: Москва Сообщений: 2037 Благодарностей: 1135 Полезность: 968 Меценат	voed, да, и завтра он создаст тему 'обходят баны' Steam, закой 47 протокол cid_NoSteam47 = 5 cid_NoSteam48 = 5 Напишу программу на python
	Поблагодарили 0 раз Поблагодарили 0 раз

Steam	31.1.2015, 12:41 Сообщение #8
Стаж: 12 лет Сообщений: 36 Благодарностей: 1 Полезность: 19	Все равно банит по IP Цитата(ex3m777 @ 31.1.2015, 8:42) voed, да, и завтра он создаст тему 'обходят баны' Steam, закой 47 протокол cid_NoSteam47 = 5 cid_NoSteam48 = 5
	Поблагодарили 0 раз Поблагодарили 0 раз

perfectblood0	31.1.2015, 12:52 Сообщение #9
Стаж: 17 лет Сообщений: 5065 Благодарностей: 2685 Полезность: 488	dproto генерирует ID, бан система банит(как бы странно не звучало) Причем здесь dproto?
	Поблагодарили 0 раз Поблагодарили 0 раз

georgeml	31.1.2015, 12:59 Сообщение #10
Стаж: 12 лет Сообщений: 1467 Благодарностей: 439 Полезность: 423	Цитата(Steam @ 31.1.2015, 12:41) Все равно банит по IP Вполне логично Код: if ( !equal("STEAM_0:", authid2, 8)) { client_cmd(id, "amx_banip #%i %i ^"%s^"", userid2, g_menuSettings[id], reason); А судя по вашему конфигу Дпрото, только # For Legit Steam clients (default is real STEAM_xx:xx:xx [1]) cid_Steam = 1 имеет префикс "STEAM_0:". Остальные имеют VALVE_xx:xx:xx (кроме cid_NoSteam47 = 8 и cid_NoSteam48 = 10) Ставьте 1 для эмуляторов (сейчас стоит 2) Не мешало бы Дпрото обновить (в конфиге даже соли нет- то ли версия старая, то ли конфиг не меняли) Отредактировал: georgeml, - 31.1.2015, 13:02
	Поблагодарили 0 раз Поблагодарили 0 раз

Steam	31.1.2015, 13:00 Сообщение #11
Стаж: 12 лет Сообщений: 36 Благодарностей: 1 Полезность: 19	Если стоит такой конфиг: Скрытый текст # # General rule for modifying this file: # DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS # # ======================================================== # DPROTO CONFIGURATION # ======================================================== # LoggingMode: # 1 = Console # 2 = Log Files # 3 = Both LoggingMode = 2 # ======================================================== # AUTHID MANAGEMENT # ======================================================== # ClientID types (for cid_* options) # 1: Real (or generated by HW) steam (STEAM_xx:xx:xx) # 2: Real (or generated by HW) valve (VALVE_xx:xx:xx) # 3: STEAM_ by IP # 4: VALVE_ by IP # 5: Deprecated - client will be rejected # 6: reserved for future use # 7: HLTV # 8: STEAM_ID_LAN # 9: STEAM_ID_PENDING # 10: VALVE_ID_LAN # 11: VALVE_ID_PENDING # 12: STEAM_666:88:666 # Use these options to set authid's for clients # for HLTV (default is HLTV [7] ) cid_HLTV = 7 # for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8] ) cid_NoSteam47 = 8 # for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10] ) cid_NoSteam48 = 10 # For Legit Steam clients (default is real STEAM_xx:xx:xx [1]) cid_Steam = 1 # Client recognized as pending when they sucessfully authorized, but did not get steam id # REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example) # default is STEAM_ID_PENDING [9] cid_SteamPending = 9 # For players having revEmu ( >= 9.74) on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu = 1 # For players having RevEmu 2013 on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu2013 = 1 # For players having SteamClient 2009 / revEmu > 9.82 on client-side: # default is real STEAM_xx:xx:xx [1] cid_SC2009 = 1 # For players having old revEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_OldRevEmu = 1 # For players having hCupa's SteamEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_SteamEmu = 1 # For players having AVSMP (Cracked Steam) on client-side: # default is real STEAM_xx:xx:xx [1] cid_AVSMP = 1 # For SETTI ServerScanner # default is STEAM_xx:xx:xx generated by IP [3] cid_Setti = 3 # For SXEI Clients # default is real STEAM_xx:xx:xx [1] cid_SXEI = 1 # EnableSXEIdGeneration (0 / 1) # Turns on steamid generation based on info sent by sXeI client # Enable this only if you have sXeI server installed! EnableSXEIdGeneration = 0 # SC2009_RevCompatMode (0 / 1) # Enable fix to make steamids generated for SC2009 compatible with revEmu SC2009_RevCompatMode = 1 # SteamEmuCompatMode (0 / 1) # An analog for eSTEAMATiON's EnforceSteamEmuCompatIDMode option. # Affects only Old RevEmu and SteamEmu emulators. SteamEmuCompatMode = 1 # OldEstCompatMode (0 / 1) # Enables/Disables fix for steamids generated by eST in 0.3.1 version. # Set this to 1 if you want to make steamids generated by eST as in < 0.3.0 versions. OldEstCompatMode = 0 # IPGen_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by IP IPGen_Prefix1 = 0 # IPGen_Prefix2 (int) # STEAM_a:b:c # second prefix (b) for authids generated by IP IPGen_Prefix2 = 4 # Native_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by native auth method (Steam) Native_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by Steamclient 2009 SC2009_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu RevEmu_Prefix1 = 0; # RevEmu2013_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu2013 RevEmu2013_Prefix1 = 0; # OldRevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by old RevEmu OldRevEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by SteamEmu SteamEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for AVSMP Clients (Cracked steam) AVSMP_Prefix1 = 0; # Setti_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for Setti server scanner Setti_Prefix1 = 0; # SXEI_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for sXeI clients SXEI_Prefix1 = 0; # Note that banid will use steamid WITHOUT any prefixes! # ======================================================== # ATTACKS SUPRESSION # ======================================================== # FakePlayers_ConnectInitiationCheck (seconds) # Sets the time, in seconds, in which client should initiate # game session (in other words, send the "new" command) after it has # been connected. If client did not initiated game session, it will be marked as # fake and kicked. # Default is 6 seconds. # Use 0 to disable this check. FakePlayers_ConnectInitiationCheck = 6 # FakePlayers_ClientValidationCheck (seconds) # Sets the time, in seconds, in which client should answer to random unique command # sent by server. If client did not answered for this command, it will be marked as # fake and kicked. # Default is 8 seconds. # Use 0 to disable this check. FakePlayers_ClientValidationCheck = 8 # FakePlayers_AntiReconnect (0/1) # Enables detection of fakeplayers that reconnects quickly (every < 10 seconds) # before fake players checks have completed. # This check will work only if FakePlayers_ClientValidationCheck and # FakePlayers_ConnectInitiationCheck are enabled. # Default is 1 (ON). FakePlayers_AntiReconnect = 1 # FakePlayers_CommandsOrderCheck (0/1) # Enable commands order checking on the start of initiated connection # Default is 1 (ON). FakePlayers_CommandsOrderCheck = 1 # FakePlayers_BanTime (minutes) # Dproto will ban IP spamming fakeplayers for time (in minutes) specified in this variable # use 0 for permanent ban # use negative vaules to disable ban (fake players will only be kicked) FakePlayers_BanTime = 120 # Exploits_CheckDownloads (0/1) # Enable checking of requested download files against precached resources # Default is 1 (ON). Exploits_CheckDownloads = 1 # Exploits_DisableUploads (0/1) # Disable file uploads (not customizations) to the server # Default is 1 (ON). Exploits_DisableUploads = 1 # ======================================================== # OTHER STUFF # ======================================================== # DisableNativeAuth (0/1) # Disables valve/steam auth system. # For p.47 Based: Server will not connect to auth servers. # For All: Server will not call authorization functions. # This is a fix for startup freeze for old (p.47) servers. DisableNativeAuth = 0 # ServerInfoAnswerType (0/1/2) # Sets server answer type for query requests # 0 = New style (Source Engine) # 1 = Old Style (Fix favorites list for p.47 clients) # 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request ServerInfoAnswerType = 0 # Game_Name (string) # Sets game name displayed for clients # If Game_Name is empty, native game name will be used Game_Name = [ARMY MOD] # Enables fix for proper player id displaing on HLStats server monitoring # Enable this only if you have HLStats HLStatsPlayerIdFix = 0 # ExportVersion (0 / 1) # Enables/Disables exporting of dp_version cvar # 1 = dp_version cvar will be exported to server rules. It will be visible in server monitoring tools (like HLSW) # 0 = dp_version cvar will not be exported to server rules. ExportVersion = 1 # HLTVExcept_IP (ip addr) # HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated) HLTVExcept_IP = 127.0.0.1 То банит всех, без исключения по Steam_ID или VALVE_ID Будь то лицензионная версия игры, или пиратская Если стоит такой конфиг: Скрытый текст # # General rule for modifying this file: # DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS # # ======================================================== # DPROTO CONFIGURATION # ======================================================== # LoggingMode: # 1 = Console # 2 = Log Files # 3 = Both LoggingMode = 2 # ======================================================== # AUTHID MANAGEMENT # ======================================================== # ClientID types (for cid_* options) # 1: Real (or generated by HW) steam (STEAM_xx:xx:xx) # 2: Real (or generated by HW) valve (VALVE_xx:xx:xx) # 3: STEAM_ by IP # 4: VALVE_ by IP # 5: Deprecated - client will be rejected # 6: reserved for future use # 7: HLTV # 8: STEAM_ID_LAN # 9: STEAM_ID_PENDING # 10: VALVE_ID_LAN # 11: VALVE_ID_PENDING # 12: STEAM_666:88:666 # Use these options to set authid's for clients # for HLTV (default is HLTV [7] ) cid_HLTV = 7 # for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8] ) cid_NoSteam47 = 8 # for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10] ) cid_NoSteam48 = 10 # For Legit Steam clients (default is real STEAM_xx:xx:xx [1]) cid_Steam = 1 # Client recognized as pending when they sucessfully authorized, but did not get steam id # REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example) # default is STEAM_ID_PENDING [9] cid_SteamPending = 9 # For players having revEmu ( >= 9.74) on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu = 2 # For players having RevEmu 2013 on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu2013 = 2 # For players having SteamClient 2009 / revEmu > 9.82 on client-side: # default is real STEAM_xx:xx:xx [1] cid_SC2009 = 2 # For players having old revEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_OldRevEmu = 2 # For players having hCupa's SteamEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_SteamEmu = 1 # For players having AVSMP (Cracked Steam) on client-side: # default is real STEAM_xx:xx:xx [1] cid_AVSMP = 2 # For SETTI ServerScanner # default is STEAM_xx:xx:xx generated by IP [3] cid_Setti = 4 # For SXEI Clients # default is real STEAM_xx:xx:xx [1] cid_SXEI = 1 # EnableSXEIdGeneration (0 / 1) # Turns on steamid generation based on info sent by sXeI client # Enable this only if you have sXeI server installed! EnableSXEIdGeneration = 0 # SC2009_RevCompatMode (0 / 1) # Enable fix to make steamids generated for SC2009 compatible with revEmu SC2009_RevCompatMode = 1 # SteamEmuCompatMode (0 / 1) # An analog for eSTEAMATiON's EnforceSteamEmuCompatIDMode option. # Affects only Old RevEmu and SteamEmu emulators. SteamEmuCompatMode = 1 # OldEstCompatMode (0 / 1) # Enables/Disables fix for steamids generated by eST in 0.3.1 version. # Set this to 1 if you want to make steamids generated by eST as in < 0.3.0 versions. OldEstCompatMode = 0 # IPGen_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by IP IPGen_Prefix1 = 0 # IPGen_Prefix2 (int) # STEAM_a:b:c # second prefix (b) for authids generated by IP IPGen_Prefix2 = 4 # Native_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by native auth method (Steam) Native_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by Steamclient 2009 SC2009_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu RevEmu_Prefix1 = 0; # RevEmu2013_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu2013 RevEmu2013_Prefix1 = 0; # OldRevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by old RevEmu OldRevEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by SteamEmu SteamEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for AVSMP Clients (Cracked steam) AVSMP_Prefix1 = 0; # Setti_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for Setti server scanner Setti_Prefix1 = 0; # SXEI_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for sXeI clients SXEI_Prefix1 = 0; # Note that banid will use steamid WITHOUT any prefixes! # ======================================================== # ATTACKS SUPRESSION # ======================================================== # FakePlayers_ConnectInitiationCheck (seconds) # Sets the time, in seconds, in which client should initiate # game session (in other words, send the "new" command) after it has # been connected. If client did not initiated game session, it will be marked as # fake and kicked. # Default is 6 seconds. # Use 0 to disable this check. FakePlayers_ConnectInitiationCheck = 6 # FakePlayers_ClientValidationCheck (seconds) # Sets the time, in seconds, in which client should answer to random unique command # sent by server. If client did not answered for this command, it will be marked as # fake and kicked. # Default is 8 seconds. # Use 0 to disable this check. FakePlayers_ClientValidationCheck = 8 # FakePlayers_AntiReconnect (0/1) # Enables detection of fakeplayers that reconnects quickly (every < 10 seconds) # before fake players checks have completed. # This check will work only if FakePlayers_ClientValidationCheck and # FakePlayers_ConnectInitiationCheck are enabled. # Default is 1 (ON). FakePlayers_AntiReconnect = 1 # FakePlayers_CommandsOrderCheck (0/1) # Enable commands order checking on the start of initiated connection # Default is 1 (ON). FakePlayers_CommandsOrderCheck = 1 # FakePlayers_BanTime (minutes) # Dproto will ban IP spamming fakeplayers for time (in minutes) specified in this variable # use 0 for permanent ban # use negative vaules to disable ban (fake players will only be kicked) FakePlayers_BanTime = 120 # Exploits_CheckDownloads (0/1) # Enable checking of requested download files against precached resources # Default is 1 (ON). Exploits_CheckDownloads = 1 # Exploits_DisableUploads (0/1) # Disable file uploads (not customizations) to the server # Default is 1 (ON). Exploits_DisableUploads = 1 # ======================================================== # OTHER STUFF # ======================================================== # DisableNativeAuth (0/1) # Disables valve/steam auth system. # For p.47 Based: Server will not connect to auth servers. # For All: Server will not call authorization functions. # This is a fix for startup freeze for old (p.47) servers. DisableNativeAuth = 0 # ServerInfoAnswerType (0/1/2) # Sets server answer type for query requests # 0 = New style (Source Engine) # 1 = Old Style (Fix favorites list for p.47 clients) # 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request ServerInfoAnswerType = 0 # Game_Name (string) # Sets game name displayed for clients # If Game_Name is empty, native game name will be used Game_Name = [ARMY MOD] # Enables fix for proper player id displaing on HLStats server monitoring # Enable this only if you have HLStats HLStatsPlayerIdFix = 0 # ExportVersion (0 / 1) # Enables/Disables exporting of dp_version cvar # 1 = dp_version cvar will be exported to server rules. It will be visible in server monitoring tools (like HLSW) # 0 = dp_version cvar will not be exported to server rules. ExportVersion = 1 # HLTVExcept_IP (ip addr) # HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated) HLTVExcept_IP = 127.0.0.1 То по Steam_ID банит лишь тех, у кого real_Steam, а у кого пиратская версия, только по IP банит Мне надо, что бы на этом конфиге банило всех по Steam или VALVE ID без исключения. Так как на первом конфиге если работает сервер, то не работают звания из плагина Army_Ranks Ult1mate у тех, у кого пиратская версия игры. У кого real_Steam-работают нормально Цитата(perfectblood0 @ 31.1.2015, 15:52) dproto генерирует ID, бан система банит(как бы странно не звучало) Причем здесь dproto?
	Поблагодарили 0 раз Поблагодарили 0 раз

georgeml	31.1.2015, 13:05 Сообщение #12
Стаж: 12 лет Сообщений: 1467 Благодарностей: 439 Полезность: 423	Цитата(Steam @ 31.1.2015, 13:00) Мне надо, что бы на этом конфиге банило всех по Steam или VALVE ID без исключения. Так как на первом конфиге если работает сервер, то не работают звания из плагина Army_Ranks Ult1mate у тех, у кого пиратская версия игры. У кого real_Steam-работают нормально Тогда, либо меняйте исходник AB и убирайте проверку на префикс, либо сделайте 1 раз изменения в БД- смените назначенный Valve_ на Steam_
	Поблагодарили 0 раз Поблагодарили 0 раз

Steam	31.1.2015, 13:17 Сообщение #13
Стаж: 12 лет Сообщений: 36 Благодарностей: 1 Полезность: 19	AB не использует базу данных MySQL Исходника нет, автор сделал его без исходника. Мне просто интересно. Почему на 1ом конфиге Dproto он банит всех по Steam_ID и Valve_ID без исключения А на другом исходнике он лишь банит только тех по Steam_ID, у кого Real_Steam Какую сделать настойку, что бы он вновь банил всех, у кого Пиратка, или Лицензия по Steam_ID и Valve_ID Как настроить меня интересует для бана мое Dproto.cfg Цитата(georgeml @ 31.1.2015, 16:05) Тогда, либо меняйте исходник AB и убирайте проверку на префикс, либо сделайте 1 раз изменения в БД- смените назначенный Valve_ на Steam_ Цитата(Steam @ 31.1.2015, 16:14) AB не использует базу данных MySQL Исходника нет, автор сделал его без исходника. Мне просто интересно. Почему на 1ом конфиге Dproto он банит всех по Steam_ID и Valve_ID без исключения А на другом исходнике он лишь банит только тех по Steam_ID, у кого Real_Steam Какую сделать настойку, что бы он вновь банил всех, у кого Пиратка, или Лицензия по Steam_ID и Valve_ID Как настроить меня интересует для бана мое Dproto.cfg Вот собственно говоря сам файл Dproto.cfg, который нужно настроить так, как я написал выше: Скрытый текст # # General rule for modifying this file: # DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS # # ======================================================== # DPROTO CONFIGURATION # ======================================================== # LoggingMode: # 1 = Console # 2 = Log Files # 3 = Both LoggingMode = 2 # ======================================================== # AUTHID MANAGEMENT # ======================================================== # ClientID types (for cid_* options) # 1: Real (or generated by HW) steam (STEAM_xx:xx:xx) # 2: Real (or generated by HW) valve (VALVE_xx:xx:xx) # 3: STEAM_ by IP # 4: VALVE_ by IP # 5: Deprecated - client will be rejected # 6: reserved for future use # 7: HLTV # 8: STEAM_ID_LAN # 9: STEAM_ID_PENDING # 10: VALVE_ID_LAN # 11: VALVE_ID_PENDING # 12: STEAM_666:88:666 # Use these options to set authid's for clients # for HLTV (default is HLTV [7] ) cid_HLTV = 7 # for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8] ) cid_NoSteam47 = 8 # for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10] ) cid_NoSteam48 = 10 # For Legit Steam clients (default is real STEAM_xx:xx:xx [1]) cid_Steam = 1 # Client recognized as pending when they sucessfully authorized, but did not get steam id # REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example) # default is STEAM_ID_PENDING [9] cid_SteamPending = 9 # For players having revEmu ( >= 9.74) on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu = 2 # For players having RevEmu 2013 on client-side: # default is real STEAM_xx:xx:xx [1] cid_RevEmu2013 = 2 # For players having SteamClient 2009 / revEmu > 9.82 on client-side: # default is real STEAM_xx:xx:xx [1] cid_SC2009 = 2 # For players having old revEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_OldRevEmu = 2 # For players having hCupa's SteamEmu on client-side: # default is real STEAM_xx:xx:xx [1] cid_SteamEmu = 1 # For players having AVSMP (Cracked Steam) on client-side: # default is real STEAM_xx:xx:xx [1] cid_AVSMP = 2 # For SETTI ServerScanner # default is STEAM_xx:xx:xx generated by IP [3] cid_Setti = 4 # For SXEI Clients # default is real STEAM_xx:xx:xx [1] cid_SXEI = 1 # EnableSXEIdGeneration (0 / 1) # Turns on steamid generation based on info sent by sXeI client # Enable this only if you have sXeI server installed! EnableSXEIdGeneration = 0 # SC2009_RevCompatMode (0 / 1) # Enable fix to make steamids generated for SC2009 compatible with revEmu SC2009_RevCompatMode = 1 # SteamEmuCompatMode (0 / 1) # An analog for eSTEAMATiON's EnforceSteamEmuCompatIDMode option. # Affects only Old RevEmu and SteamEmu emulators. SteamEmuCompatMode = 1 # OldEstCompatMode (0 / 1) # Enables/Disables fix for steamids generated by eST in 0.3.1 version. # Set this to 1 if you want to make steamids generated by eST as in < 0.3.0 versions. OldEstCompatMode = 0 # IPGen_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by IP IPGen_Prefix1 = 0 # IPGen_Prefix2 (int) # STEAM_a:b:c # second prefix (b) for authids generated by IP IPGen_Prefix2 = 4 # Native_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by native auth method (Steam) Native_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by Steamclient 2009 SC2009_Prefix1 = 0; # RevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu RevEmu_Prefix1 = 0; # RevEmu2013_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by RevEmu2013 RevEmu2013_Prefix1 = 0; # OldRevEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by old RevEmu OldRevEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids generated by SteamEmu SteamEmu_Prefix1 = 0; # SteamEmu_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for AVSMP Clients (Cracked steam) AVSMP_Prefix1 = 0; # Setti_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for Setti server scanner Setti_Prefix1 = 0; # SXEI_Prefix1 (int) # STEAM_a:b:c # first prefix (a) for authids assigned for sXeI clients SXEI_Prefix1 = 0; # Note that banid will use steamid WITHOUT any prefixes! # ======================================================== # ATTACKS SUPRESSION # ======================================================== # FakePlayers_ConnectInitiationCheck (seconds) # Sets the time, in seconds, in which client should initiate # game session (in other words, send the "new" command) after it has # been connected. If client did not initiated game session, it will be marked as # fake and kicked. # Default is 6 seconds. # Use 0 to disable this check. FakePlayers_ConnectInitiationCheck = 6 # FakePlayers_ClientValidationCheck (seconds) # Sets the time, in seconds, in which client should answer to random unique command # sent by server. If client did not answered for this command, it will be marked as # fake and kicked. # Default is 8 seconds. # Use 0 to disable this check. FakePlayers_ClientValidationCheck = 8 # FakePlayers_AntiReconnect (0/1) # Enables detection of fakeplayers that reconnects quickly (every < 10 seconds) # before fake players checks have completed. # This check will work only if FakePlayers_ClientValidationCheck and # FakePlayers_ConnectInitiationCheck are enabled. # Default is 1 (ON). FakePlayers_AntiReconnect = 1 # FakePlayers_CommandsOrderCheck (0/1) # Enable commands order checking on the start of initiated connection # Default is 1 (ON). FakePlayers_CommandsOrderCheck = 1 # FakePlayers_BanTime (minutes) # Dproto will ban IP spamming fakeplayers for time (in minutes) specified in this variable # use 0 for permanent ban # use negative vaules to disable ban (fake players will only be kicked) FakePlayers_BanTime = 120 # Exploits_CheckDownloads (0/1) # Enable checking of requested download files against precached resources # Default is 1 (ON). Exploits_CheckDownloads = 1 # Exploits_DisableUploads (0/1) # Disable file uploads (not customizations) to the server # Default is 1 (ON). Exploits_DisableUploads = 1 # ======================================================== # OTHER STUFF # ======================================================== # DisableNativeAuth (0/1) # Disables valve/steam auth system. # For p.47 Based: Server will not connect to auth servers. # For All: Server will not call authorization functions. # This is a fix for startup freeze for old (p.47) servers. DisableNativeAuth = 0 # ServerInfoAnswerType (0/1/2) # Sets server answer type for query requests # 0 = New style (Source Engine) # 1 = Old Style (Fix favorites list for p.47 clients) # 2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request ServerInfoAnswerType = 0 # Game_Name (string) # Sets game name displayed for clients # If Game_Name is empty, native game name will be used Game_Name = [ARMY MOD] # Enables fix for proper player id displaing on HLStats server monitoring # Enable this only if you have HLStats HLStatsPlayerIdFix = 0 # ExportVersion (0 / 1) # Enables/Disables exporting of dp_version cvar # 1 = dp_version cvar will be exported to server rules. It will be visible in server monitoring tools (like HLSW) # 0 = dp_version cvar will not be exported to server rules. ExportVersion = 1 # HLTVExcept_IP (ip addr) # HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated) HLTVExcept_IP = 127.0.0.1
	Поблагодарили 0 раз Поблагодарили 0 раз

georgeml	31.1.2015, 13:28 Сообщение #14
Стаж: 12 лет Сообщений: 1467 Благодарностей: 439 Полезность: 423	Цитата(Steam @ 31.1.2015, 14:17) AB не использует базу данных MySQL Армиранк использует! В общем, ясно, что придется разжевывать.. Сейчас в плагине идет бан по STEAM_0:... если префикс не STEAM_0:, то дается бан по ИП. ClientID types: 1- cid_NoSteam47 = 8 2- cid_NoSteam48 = 10 3- cid_SteamPending = 9 4- cid_RevEmu = 2 5- cid_RevEmu2013 = 2 6- cid_SC2009 = 2 7- cid_OldRevEmu = 2 8- cid_SteamEmu = 1 9- cid_AVSMP = 2 10- cid_Setti = 4 11- cid_SXEI = 1 Как видим, префикс STEAM_0: имеют только №8 и 10, т.е. только они будут забанены по STEAM, остальные будут забанены по ИП!!! Т.е. чтобы всем давать бан по STEAM_0:, то всем эмулям надо дать такой префикс, т.е. изменить 2 на 1 в №4, 5, 6, 7 (1, 3 и 9 можно запретить- выставить 5) Но, у вас звания сейчас, с таким конфигом Дпрото для НЕ STEAM_0: записываются по VALVE_0:, это значит, что при изменении конфига они не будут читаться, НО они останутся в БД как VALVE_0!!! Т.е. если выдать префиксы STEAM_0: (т.е. поставить cid_..=1), то в БД надо заменить все записи VALVE_0 на STEAM_0.. Либо менять исходник, убирать проверку на наличие STEAM_0: (исходники в паблике- не проблема, откуда же я взял вышеуказанный код..)
	Поблагодарили 1 раз Поблагодарили 1 раз Steam

voed	31.1.2015, 13:32 Сообщение #15
Стаж: 11 лет Сообщений: 2593 Благодарностей: 1760 Полезность: 405	Цитата(ex3m777 @ 31.1.2015, 5:42) voed, да, и завтра он создаст тему 'обходят баны' Любой бан можно обойти
	Поблагодарили 0 раз Поблагодарили 0 раз

Steam	31.1.2015, 13:58 Сообщение #16
Стаж: 12 лет Сообщений: 36 Благодарностей: 1 Полезность: 19	Спасибо большое. За детальный ответ. Выставил все, что вы написали так же. Звания у пиратских версий игры пропали. У real Steam остались. Где найти эту БД что бы там поменять VALVE на Steam? Цитата(georgeml @ 31.1.2015, 16:28) Армиранк использует! В общем, ясно, что придется разжевывать.. Сейчас в плагине идет бан по STEAM_0:... если префикс не STEAM_0:, то дается бан по ИП. ClientID types: 1- cid_NoSteam47 = 8 2- cid_NoSteam48 = 10 3- cid_SteamPending = 9 4- cid_RevEmu = 2 5- cid_RevEmu2013 = 2 6- cid_SC2009 = 2 7- cid_OldRevEmu = 2 8- cid_SteamEmu = 1 9- cid_AVSMP = 2 10- cid_Setti = 4 11- cid_SXEI = 1 Как видим, префикс STEAM_0: имеют только №8 и 10, т.е. только они будут забанены по STEAM, остальные будут забанены по ИП!!! Т.е. чтобы всем давать бан по STEAM_0:, то всем эмулям надо дать такой префикс, т.е. изменить 2 на 1 в №4, 5, 6, 7 (1, 3 и 9 можно запретить- выставить 5) Но, у вас звания сейчас, с таким конфигом Дпрото для НЕ STEAM_0: записываются по VALVE_0:, это значит, что при изменении конфига они не будут читаться, НО они останутся в БД как VALVE_0!!! Т.е. если выдать префиксы STEAM_0: (т.е. поставить cid_..=1), то в БД надо заменить все записи VALVE_0 на STEAM_0.. Либо менять исходник, убирать проверку на наличие STEAM_0: (исходники в паблике- не проблема, откуда же я взял вышеуказанный код..)
	Поблагодарили 0 раз Поблагодарили 0 раз

Steam	31.1.2015, 14:15 Сообщение #17
Стаж: 12 лет Сообщений: 36 Благодарностей: 1 Полезность: 19	Спасибо. Да ты красавчик! Я допер где сменить в БД))))))) Все работает)))))) Цитата(georgeml @ 31.1.2015, 16:28) Армиранк использует! В общем, ясно, что придется разжевывать.. Сейчас в плагине идет бан по STEAM_0:... если префикс не STEAM_0:, то дается бан по ИП. ClientID types: 1- cid_NoSteam47 = 8 2- cid_NoSteam48 = 10 3- cid_SteamPending = 9 4- cid_RevEmu = 2 5- cid_RevEmu2013 = 2 6- cid_SC2009 = 2 7- cid_OldRevEmu = 2 8- cid_SteamEmu = 1 9- cid_AVSMP = 2 10- cid_Setti = 4 11- cid_SXEI = 1 Как видим, префикс STEAM_0: имеют только №8 и 10, т.е. только они будут забанены по STEAM, остальные будут забанены по ИП!!! Т.е. чтобы всем давать бан по STEAM_0:, то всем эмулям надо дать такой префикс, т.е. изменить 2 на 1 в №4, 5, 6, 7 (1, 3 и 9 можно запретить- выставить 5) Но, у вас звания сейчас, с таким конфигом Дпрото для НЕ STEAM_0: записываются по VALVE_0:, это значит, что при изменении конфига они не будут читаться, НО они останутся в БД как VALVE_0!!! Т.е. если выдать префиксы STEAM_0: (т.е. поставить cid_..=1), то в БД надо заменить все записи VALVE_0 на STEAM_0.. Либо менять исходник, убирать проверку на наличие STEAM_0: (исходники в паблике- не проблема, откуда же я взял вышеуказанный код..)
	Поблагодарили 0 раз Поблагодарили 0 раз

georgeml	31.1.2015, 14:15 Сообщение #18
Стаж: 12 лет Сообщений: 1467 Благодарностей: 439 Полезность: 423	Цитата(Steam @ 31.1.2015, 13:58) Выставил все, что вы написали так же. Звания у пиратских версий игры пропали. У real Steam остались. Где найти эту БД что бы там поменять VALVE на Steam? Откуда же мне знать?) Где вы ее взяли? Дома, на хостинге, у друга... или в файл пишет...
	Поблагодарили 0 раз Поблагодарили 0 раз

Steam	31.1.2015, 15:15 Сообщение #19
Стаж: 12 лет Сообщений: 36 Благодарностей: 1 Полезность: 19	Тема закрыта. Помог) А VALVE уже канит в лепту на моем сервере? Цитата(georgeml @ 31.1.2015, 17:15) Откуда же мне знать?) Где вы ее взяли? Дома, на хостинге, у друга... или в файл пишет...
	Поблагодарили 0 раз Поблагодарили 0 раз

« Предыдущая тема · Общие вопросы по модам и плагинам · Следующая тема »

0 пользователей и 1 гостей читают эту тему:

Наши новости:

Правила форума

Настройка бана по Steam_ID в Dproto.cfg