Ограничение 100 Мб

# This is the ProFTPD configuration file
# $Id: proftpd.conf,v 1.1 2004/02/26 17:54:30 thias Exp $

ServerName            "ProFTPD server"
ServerIdent            on "FTP Server ready."
ServerAdmin            root@localhost
ServerType            standalone
#ServerType            inetd
DefaultServer            on
AccessGrantMsg            "User %u logged in."
#DisplayConnect            /etc/ftpissue
#DisplayLogin            /etc/ftpmotd
#DisplayGoAway            /etc/ftpgoaway
DeferWelcome            off


# Use this to excude users from the chroot
DefaultRoot            ~

# Use pam to authenticate (default) and be authoritative
AuthPAMConfig            proftpd
AuthOrder            mod_auth_pam.c* mod_auth_unix.c


AuthUserFile    /etc/ftpd.passwd

AuthGroupFile    /etc/ftpd.group

RequireValidShell off

PersistentPasswd off

AuthPAM off

# Do not perform ident nor DNS lookups (hangs when the port is filtered)
IdentLookups            off
UseReverseDNS            off

# Port 21 is the standard FTP port.
Port                21

# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask                022

# Default to show dot files in directory listings
ListOptions            "-a"

# See Configuration.html for these (here are the default values)
#MultilineRFC2228        off
#RootLogin            off
#LoginPasswordPrompt        on
#MaxLoginAttempts        3
#MaxClientsPerHost        none
#AllowForeignAddress        off    # For FXP

# Allow to resume not only the downloads but the uploads too
AllowRetrieveRestart        on
AllowStoreRestart        on

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances            20

# Set the user and group that the server normally runs at.
User                nobody
Group                nobody

# Disable sendfile by default since it breaks displaying the download speeds in
# ftptop and ftpwho
UseSendfile            no

# This is where we want to put the pid file
ScoreboardFile            /var/run/proftpd.score

# Normally, we want users to do a few things.
<Global>
  AllowOverwrite        yes
  <Limit ALL SITE_CHMOD>
    AllowAll
  </Limit>
</Global>

# Define the log formats
LogFormat            default    "%h %l %u %t \"%r\" %s %b"
LogFormat            auth    "%v [%P] %h %t \"%r\" %s"

# TLS
# Explained at http://www.castaglia.org/proftpd/modules/mod_tls.html
#TLSEngine            on
#TLSRequired            on
#TLSRSACertificateFile        /etc/pki/tls/certs/proftpd.pem
#TLSRSACertificateKeyFile    /etc/pki/tls/certs/proftpd.pem
#TLSCipherSuite            ALL:!ADH:!DES
#TLSOptions            NoCertRequest
#TLSVerifyClient        off
##TLSRenegotiate        ctrl 3600 data 512000 required off timeout 300
#TLSLog                /var/log/proftpd/tls.log

# SQL authentication Dynamic Shared Object (DSO) loading
# See README.DSO and howto/DSO.html for more details.
#<IfModule mod_dso.c>
#   LoadModule mod_sql.c
#   LoadModule mod_sql_mysql.c
#   LoadModule mod_sql_postgres.c
#</IfModule>

# A basic anonymous configuration, with an upload directory.
#<Anonymous ~ftp>
#  User                ftp
#  Group                ftp
#  AccessGrantMsg        "Anonymous login ok, restrictions apply."
#
#  # We want clients to be able to login with "anonymous" as well as "ftp"
#  UserAlias            anonymous ftp
#
#  # Limit the maximum number of anonymous logins
#  MaxClients            10 "Sorry, max %m users -- try again later"
#
#  # Put the user into /pub right after login
#  #DefaultChdir            /pub
#
#  # We want 'welcome.msg' displayed at login, '.message' displayed in
#  # each newly chdired directory and tell users to read README* files.
#  DisplayLogin            /welcome.msg
#  DisplayFirstChdir        .message
#  DisplayReadme            README*
#
#  # Some more cosmetic and not vital stuff
#  DirFakeUser            on ftp
#  DirFakeGroup            on ftp
#
#  # Limit WRITE everywhere in the anonymous chroot
#  <Limit WRITE SITE_CHMOD>
#    DenyAll
#  </Limit>
#
#  # An upload directory that allows storing files but not retrieving
#  # or creating directories.
#  <Directory uploads/*>
#    AllowOverwrite        no
#    <Limit READ>
#      DenyAll
#    </Limit>
#
#    <Limit STOR>
#      AllowAll
#    </Limit>
#  </Directory>
#
#  # Don't write anonymous accesses to the system wtmp file (good idea!)
#  WtmpLog            off
#
#  # Logging for the anonymous transfers
#  ExtendedLog        /var/log/proftpd/access.log WRITE,READ default
##  ExtendedLog        /var/log/proftpd/auth.log AUTH auth
#  </Anonymous>

[root@MyCentOs etc]# rpm -qa | less
filesystem-2.4.30-3.el6.i686
gpg-pubkey-0608b895-4bd22942
gpg-pubkey-00f97f56-467e318a
gpm-libs-1.20.6-12.el6.i686
php-php-gettext-1.0.11-12.el6.remi.noarch
php-phpseclib-crypt-base-1.0.0-1.el6.remi.noarch
libcap-2.16-5.5.el6.i686
php-phpseclib-crypt-rijndael-1.0.0-1.el6.remi.noarch
smartmontools-5.43-1.el6.i686
info-4.13a-8.el6.i686
php-tcpdf-dejavu-sans-fonts-6.2.12-1.el6.remi.noarch
policycoreutils-2.0.83-24.el6.i686
python-libs-2.6.6-64.el6.i686
wget-1.12-5.el6_6.1.i686
rpm-libs-4.8.0-47.el6.i686
telnet-0.17-48.el6.i686
rpm-python-4.8.0-47.el6.i686
compat-mysql51-5.1.54-1.el6.remi.i686
libselinux-2.0.94-5.8.el6.i686
apr-1.3.9-5.el6_2.i686
apr-util-1.3.9-3.el6_0.1.i686
readline-6.0-4.el6.i686
screen-4.0.3-18.el6.i686
libgpg-error-1.7-4.el6.i686
sudo-1.8.6p3-20.el6_7.i686
freetype-2.3.11-15.el6_6.1.i686
libuuid-2.17.2-12.18.el6.i686
libvpx-1.3.0-5.el6_5.i686
libblkid-2.17.2-12.18.el6.i686
vim-filesystem-7.4.629-5.el6.i686
vim-enhanced-7.4.629-5.el6.i686
yum-3.2.29-69.el6.centos.noarch
fontconfig-2.8.0-5.el6.i686
libidn-1.18-2.el6.i686
python-inotify-0.9.1-1.el6.noarch
libxslt-1.1.26-2.el6_3.1.i686
xz-libs-4.999.9-0.5.beta.20091007git.el6.i686
gamin-python-0.1.10-9.el6.i686
ipset-6.11-4.el6.i686
bzip2-1.0.5-7.el6_0.i686
bash-4.1.2-33.el6_7.1.i686